4X 1.5" 5x4.5 5x114.3 Wheel Spacers for Jeep Wrangler YJ TJ Cherokee XJ KJ KK ZJ

Description: Wheel Spacer Specifications Quantity: Four (4) Thickness: 1.5" (38.1mm) Bolt Pattern: 5x4.5(5x114.3mm) Center Bore: 82.5mm Stud/Nut Thread Pitch: M1/2x20 Compatible with: 1987-2006 J-e-e-p Wrangler YJ TJ (Unfit jk models) 1984-2013 J-e-e-p Cherokee XJ 1986-1992 J-e-e-p Comanche MJ 2001-2013 J-e-e-p Liberty KJ KK 1992-1998 J-e-e-p Grand Cherokee ZJ 1994-2014 F-o-r-d Mustang（Unfit 15-17 Mustang) 1982-2012 F-o-r-d Ranger 1990-2019 F-o-r-d Explorer 2006-2014 F-o-r-d Edge 1991-2011 F-o-r-d Crown Victoria 2003-2004 F-o-r-d Mach 1 1982-1990 F-o-r-d Bronco (NO XLT Model) BENEFITS: Positions your wheels 1.5 inch outward Allows installation of wider wheels & tires Increases your vehicle's track-width Hydraulic Pre-Pressed Studs eliminate the risk of vibrations Improves the look of your vehicle TECHNOLOGY: High Tensile Strength Forged 6061-T6 Aluminum Precision CNC Machined ensure high accuracy and safety Hard Anodized for durablity High quality pre-installed heat treated 12.9 grade studs 1 2 3 4 Installation Procedure Step 1: Following your vehicle owner's manual, proper raise the vehicle and support it using adequately load-rated jackstands. Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, don't continue with this installation. Remove any wheel visible rust from the mating flange on the vehicle's rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstruction which could prevent proper seating of the spacer/adapter. Step 2: If proper seating can be achieved, apply provided thread locker to vehicle's studs and mount the wheel spacers on to rotor by torquing provided wheel spacers/adapter lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench. Install wheel on to wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench. DO NOT USE AN IMPACT WRENCH. Step 3: Check that wheel and tire clearance allow for full steering(lock-to-lock). If there is no interference, vehicle may be lowered. Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles. On Sep 6, 2023 at 00:55:07 PDT, seller added the following information:

Price: 62.99 USD

Location: Los Angeles, California

End Time: 2024-12-06T08:49:41.000Z

Shipping Cost: 0 USD