Description: Dayton Audio SPA500DSP Subwoofer Plate Amplifier Dayton Audio SPA500DSP Subwoofer Plate Amplifier Product description The Dayton Audio SPA500DSP digitally processed plate amplifier offers an elite level of control over your entire system (i.e. subwoofer and mains). This unique amplifier allows you to fine tune your systems low frequency performance, and at the same time high pass to your mains (or satellites) protecting them from damage due to over excursion. Highlights DSP functions include: 7 PEQ bands, LPF, phase, subsonic filter, limiter, mains delay, and HPF Single-knob control panel with high-contrast LCD display and status LEDs Fast, intuitive PC-based GUI software enables full access to the DSP functions Efficient Class D output topology ensures high-impact low frequency performance Includes both balanced and unbalance line level inputs and outputs Product details Dayton Audio SPA500DSP 500W Subwoofer Plate Amplier with DSP Dayton Audios SPA500DSP true 500 watt digital switching plate amplifier features advanced signal processing control that every audio enthusiast wants. This power and flexibility is accessible via PC-GUI software and our innovative single-knob LCD control panel. DSP Plate Amplifier Features 1. Power Mode: Select the either energy-saving or “always-on†power mode Auto: Amp goes into standby after no detected signal input for 20 minutes* On: Amp is always on, regardless of input signal status. * Amp will automatically turn on typically in one second or less once audio signals are resumed. 2. Analog input attenuation: Affects analog balanced and unbalanced inputs only. Normal: No attenuation. Hi: Attenuates input signal by -6dB. 3. USB Control: Used for PC-GUI communication with custom PC software included with your amp. 4. Feature Control: Single knob digital actuator with single/double-click enabled with rotary scrolling to navigate the amps extensive feature menu. 5. Limiter LED: Lit when Limiter is active (Red). 6. Standby/On LED: Red when amp is in energy saving “stand by†state. Green when amp is operating normally. DSP Processing Block Diagram Controlling your Subwoofer via PC GUI Volume/Phase USB link indicator: When the communication via USB with amp is successful, the GUIs LED indicator will light green. Otherwise, LED stays red. Processing Selection: Navigate across the DSP menu to adjust various DSP parameters. Sub in/out monitor: Monitor the input signal and sub output signal levels. Tools Drop Down Menu: Utilities for amp DSP management. Volume: Adjust the level (gain) of the subwoofer output. Phase: Continuously adjustable phase from 0° to 180°. Low Pass and Subsonic Filters Filter ON/OFF Button: Enable or disable the selected filter. Slope: Select roll-off gradient of the selected filter: -12dB/-24dB per octave. Frequency (Hz): Adjust cut-off frequency of the selected filter 5-Band Parametric Equalizer PEQ Window: Graphical trace is NRT editable. Bands can be shaped by cursor or direct input and/or sliders 5 Band-digital PEQ adjustments: Band On/Off: Bypass or enable by clicking the colorized 1~5 buttons Center Frequency (CF): Adjust Center Frequency of each EQ band, 10~200Hz, steps: 1Hz. Gain: Adjust the EQ gain (apparent volume), -12 ~ +6dB, steps: 0.1dB Q (EQ width): Adjust the “Q†value, 0.4~16 , step: 0.1 Dual-Band Limiter Threshold: Adjust the limiter threshold, 0~-12dB, step: 0.1dB Attack: Adjust limiters “attack timeâ€. This controls the time taken to attenuate signals over the threshold to the specified threshold level. Range: 1/5/10/20/100ms Release: Adjust limiters “release timeâ€. When signal is below threshold level, this controls the time taken to restore back to original level. Range: 60/120/240/480/1000/2000ms Frequency: The crossover frequency point between the 2 bands: Band 1 (Low Frequency) Band 2 (High Frequency). High Frequency Out This block controls the DSP parameters for line level output only. Delay: Adjust the time difference between High Frequency out and Subwoofer out. HPF Control: Filter ON/OFF: Bypass or Enable the selected filter. Slope: Select roll-off gradient of the selected filter: -12dB/-24dB per octave. Frequency: Adjust cut-off frequency of the selected filter. Dayton Audio SPA500DSP GUI Software Show more Show less Shipping Handling time - 5 to 21 daysShipping time - 3-5 daysShipping Method - We ship only with UPS Express Stock - Not all items are in stock. They are held in several warehouses. Customs - No custom fees / Ask about invoice declaration Condition - New straight from the factory Items location - EUROPE Shipping - to the whole world. Service FOR THE BEST SHIPPING PRICE PLEASE ADD YOUR ITEMS TO CART AND REQUEST TOTAL FROM THE SELLER
Price: 623.94 USD
Location: LT
End Time: 2024-03-24T10:28:58.000Z
Shipping Cost: 35 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Does not apply
Compatible Brand: Does not apply
Type: Does not apply
