Earthquaker Devices Swiss Things Pedalboard Switcher

Description: DJ GEAR INSTRUMENT GEAR LIVE SOUND RECORDING MICROPHONES HEADPHONES ACCESSORIES SOFTWARE LIGHTING BUNDLES Authorized Dealer - Full Warranty Earthquaker Devices Swiss Things Pedalboard Switcher Pedalboard Switcher - Brand New - Description Swiss Things combines two true-bypass Flexi-Switch enabled effects loops, a Flexi-Switch AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost with adjustable gain, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss. This is what you can do with it: Use as many pedals as you’d like without tone-suck Quickly and easily bypass or engage all of your effects with one click Use Flexi-Switch Technology with every pedal in your setup Eliminate volume pedal tone-suck by using any expression pedal to control volume Use multiple amps without phase issues, ground loops, or extra noise Tidy up your rig, shorten cable runs, and reduce tone loss by keeping all inputs and outputs in one location Controls Here’s what the footswitches do: Loop 1: Press this to engage Loop 1. It features Flexi-Switch® Technology and is unbuffered for use with all distortion, overdrive, and fuzz pedals, or anything else that doesn’t like being buffered. Loop 2: Press this to engage Loop 2. It also features Flexi-Switch® Technology and is buffered for use with time-based effects (delay, reverb, modulation, etc.). Note: when nothing is plugged into Loop 2, it functions as a mute. Boost: press this to activate the boost. It is Flexi-Switch Technology enabled and provides up to 20dB of clean boost post-effects loops and is intended for use as an output booster. A/B: Select between Output A and Output B. Note: Output B is transformer-isolated and includes a Phase switch for use with pedals and/or amplifiers that invert the phase. Both: activate Output A and Output B at the same time and feature Flexi-Switch Technology Here’s what the input, output, send, return, and expression jacks are for: Input: plug your instrument in here. Note: If you have any “always-on” pedals (compressors, preamps, EQs, etc.) place them before Swiss Things’ input. Loop 1 Send: Plug this into the input of the first pedal in the octave/overdrive/distortion/fuzz section of your board. Loop 1 Return: Plug the output of the last pedal of the octave/overdrive/distortion/fuzz section into this jack. Loop 2 Send: Plug this into the input of the first pedal in the modulation section of your board. Loop 2 Return: Plug the output of the last pedal of your modulation section into this jack. Tuner Output: Connect this to the input of your tuner. Note: The Tuner must be always turned on. If you bypass your tuner, you may experience ground loops or hum. Volume EXP: Connect any expression pedal to this output to control volume. Note: Most volume pedals create “tone-suck” by loading the signal down and have limited travel. This solves that problem with a buffered output and allows you to use any expression pedal with the same results. The expression jack is placed after the “dirt” effects loop (Loop 1) which allows you to change volume levels without affecting gain. Output A: connect this to the input of your amplifier. Output B: connect this to the input of a separate amplifier to use multiple amps and/or to play in stereo. Note: To use Swiss Things with stereo effects, they should be placed after Outputs A & B and both outputs must be selected using the Both switch. Note: Output B is transformer-isolated and includes a Phase switch for use with pedals and/or amplifiers that invert the phase. Note: To use stereo effects after Swiss Things, do not have the Phase switch engaged otherwise the L & R inputs of your stereo effects will be out of phase. Features/Specs Dimensions 4.75 x 5.65 x 2.25 in. (121 x 144 x 57 mm) with knobs Current Draw 15 mA Input Impedance 1 MΩ Output Impedance 1 kΩ Flexi-Switch Technology This device features Flexi-Switch Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed. Since the switching is relay-based, it requires power to pass the signal. Power This device takes a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains, and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES We are authorized dealers for all these brands. Click a logo to see our listings. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost. Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES. We provide free shipping to the contiguous 48 United States, on most items. Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost. We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit. We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service. Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Please contact us for a Return Authorization before returning any items.

Price: 299 USD

Location: Winchester, Virginia

End Time: 2024-11-09T15:03:36.000Z

Shipping Cost: 0 USD